Akuvox Facial Recognition Intercom and Access Control E18C

Akuvox Facial Recognition Intercom and Access Control E18C Features:

• Visible light facial recognition
• Dual cameras with an anti-spoofing algorithm against photo and video attacks
• 20,000 face capacity & 20,000 card capacity
• Face recognition duration less than 0.2s/user, face recognition accuracy rate greater than 99.5%
• Allows both audio and video communication to an IP phone, mobile client, or softphone
• Multiple verification methods including face, PIN, cards NFC, BLE, and QR codes
• Stand-alone operation
• Configuration via a web browser
• Mask Detection and Body Temperature Detection
• Identification Mode: Face, PIN, NFC, RFID Card, BLE & QR code
• Identification Speed: <200ms

Physical & Power:

• Housing Material: Plastic
• Display: 7 Inch IPS LCD, 1024×600
• Camera: 2M pixels, WDR
• Wiegand In/Out: 1/1
• RS485 Port: 1
• RF Card Reader: 13.56MHz,125kHz & NFC
• Relay In / Out: 3 / 2
• TF Card Slot: 1
• Ethernet Port: RJ45, 10/100Mbps adaptive
• Bluetooth: Support
• Reset: 1
• 802.3af Power-over-Ethernet
• 12V DC Connector (if not using PoE)
• Tamper: Support
• Installation: Wall-mounted
• IP Level: IP65
• Working Humidity: 10~90%, no condensing
• Working Temperature: -20°C~+55°C
• Storage Temperature: -30°C~+60°C

Forehead Temperature Measurement

• Only E18C(MD02) support
• Distance: 0.3M ~ 1M
• Accuracy: 0.1°C
• Deviation: ±0.3°C
• Range: 34°C ~ 45°C

Akuvox Facial Recognition Intercom and Access Control E18C Capacity:

• Face Capacity: 20,000
• Card Capacity: 20,000
• Event Log: 50,000