C-POE-INJECT01 | 30W PoE Injector

Gigabit PoE Injector. The injector is placed between an Ethernet switch and the device, it injects power without mess up the data. You can connect this device to a non-PoE switch and run the Ethernet cable to network PoE devices.

Published On: 10/28/2021Categories: Discontinued ProductsTags: DiscontinuedSKU: C-POE-INJECT01

Gigabit PoE Injector
Input: AC 100~240V
Output: DC 52V, 30W
Distance: 300ft
Built-In Power Adapter

Specification:

Input Voltage: 100 ~240V AC
Output Voltage: 52V DC
Network Standards: IEEE802.3i : 10 Base-T, IEEE802.3i : 100Base-TX, IEEE 802.3 : Flow Control, IEEE802.3af / IEEE802.3at
PoE Power : Max 30W,
Wiring: Power porvided over pin 1236
Cable: UTP cat5 or higher
Internal Power Adapter
Processing Types: Store-and forward
Half-Duplex back pressure and IEEE802.3 full duplex flow control
Power Pin: 1 2 3 6-
Data Rate: 10/100/1000Mbps
Installation: Plug & play installation, midspan automatically detect all devices supports for PoE
Working Temp. : 0℃ ~ 40℃
Storage Temp. : -10℃ ~ 70℃
Operating Humidity : 20% ~ 85%
LED Indicator: Link, speed, PoE active, PoE error, Data in Port LED not bright, just for decoration.
Safety: CE / FCC / RoHS
Warranty: 1 year
Package: C-POE-INJECT01, Power Cord, User Guide

Weight	0.95 lbs

(888) ENS-1999

C-POE-INJECT01 | 30W PoE Injector

Title