Web: How to Enable 2-Way Audio

Post Reply
Tech Support
Posts: 179
Joined: Fri Mar 29, 2019 11:44 pm

Web: How to Enable 2-Way Audio

Post by Tech Support » Mon Jul 08, 2019 9:46 pm

UNV Web: How to Enable 2-Way Audio

To access the web client, please use a Windows based PC and use Internet Explorer as the web browser.

Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the port number after the ip address by inserting a colon “:” in between the address and port number).

1.PNG (4.28 KiB) Viewed 2625 times

Install all requested web plugins that are prompted by Internet Explorer. Once installed, you may need to refresh, or restart the web browser. You may install the plugin by selecting “Run”. In some instances, you may need to close the web browser to complete the installation. After installation completes, please re-open Internet Explorer.

2.PNG (42.32 KiB) Viewed 2625 times

After logging in, the Live View page will be where you will be able to use audio/2-way talk features. If a camera supports 2-way audio, you will see that option.

3.PNG (30.76 KiB) Viewed 2625 times

Another option is using the RCA input and output directly on the back of the recorder to produce 2-way talk audio. This will be on the bottom of the Live View page.

4.PNG (8.38 KiB) Viewed 2625 times

Post Reply