Web: How to Setup Alarm and Buzzer Notifications

Post Reply
Tech Support
Posts: 179
Joined: Fri Mar 29, 2019 11:44 pm

Web: How to Setup Alarm and Buzzer Notifications

Post by Tech Support » Tue Jul 09, 2019 4:53 pm

UNV Web: How to Setup Alarm and Buzzer Notifications

To access the web client, please use a Windows based PC and use Internet Explorer as the web browser.

Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the port number after the ip address by inserting a colon “:” in between the address and port number).

1.PNG (4.28 KiB) Viewed 2678 times

Install all requested web plugins that are prompted by Internet Explorer. Once installed, you may need to refresh, or restart the web browser. You may install the plugin by selecting “Run”. In some instances, you may need to close the web browser to complete the installation. After installation completes, please re-open Internet Explorer.

2.PNG (42.32 KiB) Viewed 2678 times

After logging in, select the “Setup” option.

3.PNG (45.97 KiB) Viewed 2678 times

After selecting Setup, select Alarm.

4.png (37.76 KiB) Viewed 2678 times

After Selecting Alarm, select the Buzzer sub-menu.

5.png (39.44 KiB) Viewed 2678 times

On this page, you will be able to set the duration of the audible buzzer when it is triggered. The numbers indicate the seconds duration (1-600 seconds).

6.PNG (20.47 KiB) Viewed 2678 times

After setting the buzzer duration, you may go into certain aspects of the system, such as the camera’s motion detection parameters, as well as VCA functions, to have these alerts trigger the audible buzzer. By default, the system has the buzzer function disabled. Place a checkmark for Buzzer in the alarm settings and this will trigger the buzzer when an event occurs.

7.PNG (36.99 KiB) Viewed 2678 times
8.PNG (41.67 KiB) Viewed 2678 times

Post Reply