Web: How to Set Up Spot Out

Post Reply
Technical Support
Posts: 173
Joined: Fri Mar 29, 2019 11:44 pm

Web: How to Set Up Spot Out

Post by Technical Support » Tue Jul 09, 2019 4:59 pm

UNV Web: How to Set Up Spot Out

To access the web client, please use a Windows based PC and use Internet Explorer as the web browser.

Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the port number after the ip address by inserting a colon “:” in between the address and port number).

1.PNG
1.PNG (4.28 KiB) Viewed 101 times


Install all requested web plugins that are prompted by Internet Explorer. Once installed, you may need to refresh, or restart the web browser. You may install the plugin by selecting “Run”. In some instances, you may need to close the web browser to complete the installation. After installation completes, please re-open Internet Explorer.

2.PNG
2.PNG (42.32 KiB) Viewed 101 times


After logging in, select the “Setup” option.

3.PNG
3.PNG (45.97 KiB) Viewed 101 times


After selecting Setup, click on the Preview sub-menu.

4.png
4.png (37.15 KiB) Viewed 101 times


Under the Preview menu, select the Video Output option. Select the monitor (HDMI2/VGA/Etc.) that will be the secondary monitor.

5.PNG
5.PNG (33.76 KiB) Viewed 101 times


After selecting the secondary (spot out) output, configure the channel display as desired. You are able to set multiple channel display types throughout the sequence if desired as well.

6.PNG
6.PNG (26.41 KiB) Viewed 101 times

Post Reply