Web: How to Search and Review Logs

Post Reply
Technical Support
Posts: 173
Joined: Fri Mar 29, 2019 11:44 pm

Web: How to Search and Review Logs

Post by Technical Support » Thu Jul 18, 2019 5:47 pm

Diamond Web: How to Search and Review Logs

***Note: You must use Internet Explorer to view the system via web interface***


To access the web client, please use a Windows based PC and use Internet Explorer as the web browser.

Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the port number after the ip address by inserting a colon “:” in between the address and port number).

Install all requested web plugins that are prompted by Internet Explorer. Once installed, you may need to refresh, or restart the web browser. You may install the plugin by selecting “Run”.

After logging in, select “Info”

1.png
1.png (56.74 KiB) Viewed 193 times


After selecting Info, on the left hand side, select Log. This page will allow you to search the logs from as long as the system has a record for that specific date.

2.PNG
2.PNG (24.24 KiB) Viewed 193 times


Select a Start Time, End Time, and Type, then click search. The field below will then populate with logs of events depending on the type of events that were searched for. You may click backup at the bottom of the screen and it will backup the log as a text (.txt) file.

3.PNG
3.PNG (29.66 KiB) Viewed 193 times

Post Reply