Four-Door Access Controller SK2604G

Four-Door Access Controller Features

• • • Four-Door Access Controller 32-bit high-speed processor
    • Supports TCP/IP communication, EHome 5.0, and ISAPI protocol. The communication data is specially encrypted to relieve
    • the concern of privacy leak
    • User-centered design. Supports adding various user types: normal user, visitor, and user in the blocklist
    • The standard hermaphrodite connector of three-phase electric adaptor
    • Security and protection: isolated internal current and a protective cover over the control board
    • Power supply indicator on the surface
    • Supports recognition and storage of card No. with a maximum length of 20
    • Supports up to 100,000 cards (including 97,000 non-visitor cards and 3,000 visitor cards) and 300,000 cards presenting
    • records
    • Supports multi-door interlock function, anti-passback function, multiple authentications function, open door with first
    • card function, super card and super password function, M1 card encryption, online upgrade function, and remote control
    • of the doors
    • Supports tampering alarm for the card reader, alarm for the door not secured, force opening door alarm, alarm for door
    • opening timeout, duress card, and code alarm, blocklist alarm, and alarm for illegal card-swiping attempts reaching the limit
    • Short circuit attempts alarm and open circuit attempts alarm
    • IP address conflict detection
    • Cross-controller anti-passback function (For cross-controller anti-passback based on the card, wire the card reader with RS-
    • 485. For cross-controller anti-passback based on network, make sure the server and device communicate with each other properly. Up to 5000 users’ records can be stored in the selected server.) and the inner-device anti-passback function
    • Supports RS-485, OSDP, and Wiegand protocol for accessing card reader. Wiegand interface supports W26, W34 and is
    • compatible with the third-party card reader with Wiegand interface
    • Supports various card types: normal/patrol/duress/super card, etc.
    • Various indicators to show different status
    • Supports automatically and manually time synchronization
    • Supports record storage function when the device is offline and insufficient storage space storage alarm function
    • Backup battery design, watchdog design and tamper-proof function
    • Data can be permanently saved after the access controller is powered off
    • Supports I/O linkage and event linkage
    • 500 groups of passwords under the authentication mode of card or password
    • Supports time zone settings