ENS offers a unique solution to a variety of unique challenges. Our Solar Powered configurations are made to provide safety and security in areas where a power supplies and ethernet cables either cannot reach or cannot be relied upon.

This technology is also used as a backup power supply for various conventional scenarios where there is a supply shortage. This allows for monitoring interruptions such as power outages, power shortage, or blackouts to not be a factor.

Junction Box

To keep the wires safe, preventing from vandalizing

Battery

To store and provide power for the camera

Camera

To capture images and record events

Solar Panel

Transforming solar power to electricity, charging the battery

Bracket

Good for the pole-amount installation

SIM Card Slot

Support 4G SIM card fir data transmission

Solar Panel

• 40W panel
• Fully charging within 1.5-3 days

Battery and Smart Power Management

• 180 WH, built-in rechargeable battery;
• automatic recharging and power saving;
• 4.5-day continuous power supply in proactive mode in cloudy/rainy days

Data Transmission

• Built-in 4G (LTE-TDD/LTE-FDD/TD-SCDMA/EVDO) module;
• ISAPI; ISUP.

Camera

• 4 MP @ 15 fps;
• ColorVu lens with F1.0 big aperture;
• 4/6 mm lens;

Protection

• IP67 for whole system, designed for outdoor use;
• Stability against category 12 typhoon;

-20-55℃ Working Temperature

• Extreme low-temperature environments can inevitably lead to battery deficiency.
• 0-60℃ model available: DS-2XS2T47G0-LD/4G/C14S40

Three choices for different users:

• 320 WH
• 180 WH
• 40 WH

With F1.0 big aperture, the camera captures color images in light and darkness.

Note:
Performance mode: this is the mode when cameras work with full functions and high performance; however the constant data communication, events and functions will not be turned on by default when switched to the mode; configuration is available.
Communication: there will be no constant data communication unless continuous streaming (live view or playback) is on. When live view or playback is off, the device withdraws data communication, except for regularly heartbeat confirmation.
Event type: the Advanced Series supports motion detection and smart perimeter protection, but not PIR detection.
Standby mode: the device goes into standby mode when the battery drops to 15% or lower.

This is the mode in which cameras can work with full functions and high performance; however the constant data communication, events and functions will not be turned on by default; configuration is available

When in continuous rainy days, a fully-charged battery can provide the cameras (the Standard Series) with power for full-time recording and data transmission for 2.5 days.

The camera goes into standby mode when the battery drops to 15% or lower.

Lots of users want to be reminded only when there’s an event, but prefer a full-time recording.

When in continuous rainy days, a fully-charged battery can provide the cameras (the Standard Series) with power for full-time recording with event alerts for 4.5 days.

The camera goes into standby mode when the battery drops to 15% or lower.

In most circumstances, users only want to be reminded when there’s an event going on, especially in remote fields.

When in continuous rainy days, a fully-charged battery can provide the cameras (the Standard Series) with power for 24 days for PIR event recording in standby mode.